Sunday, January 10, 2016

Enhancement Troubleshooting: Free Edge Separation

One of the most common problems a nail tech sees during a fill service is separation of the natural nail from the enhancement at the nail tip.  It can be very frustrating to have zero lifting or issues anywhere else but the tip is peeling away!

Causes
There are a number of reasons for free edge separation:
  • Nail tip adhesive break down
  • Improper mix ratio in acrylic - especially too wet of a ratio which may not lift at the cuticle but often pulls away at the tip.
  • Using old bulbs with gel
  • Clients using their nails as tools
  • Old product - this is less likely with today's advanced  products but there are some acrylic on the market that still use old technology. 
  • The natural nail. 
Yes, the natural nail itself is often a cause of enhancement separation at the free edge.  If you take a good look at your natural nail you will notice that as it grows, it does not grow out perfectly straight, it naturally has a lower arch and C-curve and as the nail gets longer, these become more prominent. When this happens, the nail slowly begins to pull away from the enhancement -  usually at the free edge and especially at the corners of the free edge.
The second thing that happens with natural nails that can cause separation is that the nail becomes dry.  When the nail plate is on top of the nail bed it is getting moisture from the body through the bed.  However, once it leaves the bed and becomes free edge, it is susceptible to the elements and is no longer getting any moisture or natural protection. Much like conditioning your hair, you need to condition your nails EVEN when wearing enhancements!   If the natural nails are not conditioned with oil daily, they WILL dry up, and curl away from the enhancement.  The hardest part here is convincing clients that this is essential. 
 Fixes
Gluing down the separation does not work and may trap contaminants.  Cutting off the natural nail is generally undesirable from the clients perspective and often causes further lifting.  There really is only one true fix for free edge separation - you need to remove the product  that is separated and replace with fresh product.  

Now, you don't need to soak off the entire nail but you do need to file off the whole separated area - similar to doing a backfill.  Then re-cleanse, prime and apply product per your manufacturer's instructions.  In some cases, you may have to use a form to re-extend the nail to match the other nails.

 Prevention

  • Use a thicker, gel-like nail adhesive which breaks down more slowly, or attach tips with acrylic or sculpt the nail.
  • Make sure your mix ratio is correct for your product.
  • Make sure you clean your UV./LED bulbs daily and change them regularly.
  • Have the client use a good quality cuticle oil (not one that contains mineral oil or petroleum products) not just on their cuticle area but also under the free edge on the natural nail several times a day.
  • Each time you file the length down on a set of nails where the natural nail is the same length as the enhancement, you will need to cap the edge with a small layer of acrylic or gel to seal around the client's nails and the enhancement.  
Posted by at
Labels: , , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)